In this blog, I am going to discuss How to Create a Wi-Fi Hotspot Using Command Prompt 2022
Most probably, we all somehow depended on the Internet, and Internet connectivity is one of the things, that we need most in this era of booming technology.
Many of us prefer to use the computer’s fast internet connection.
Here is the solution you can use Wireless Hosted Network, this method is basically introduced in Windows 7.
Just by using these features, you can easily create a virtual wireless adapter.
To complete this process, you should use CMC (Command Prompt) and run it as administrator.
Here in this guide, you will know how to create a Wi-Fi hotspot using Command Prompt.
Here any system which is running Windows XP and up, including Windows 8 can use this method. Using third-party software may eat up memory even after it is closed.
Create a Wi-Fi Hotspot Using Command Prompt
So let’s get started with the process:
Step 1: Here, just hit the Start button, and start typing “Command Prompt” right in the search box.
If you are using Windows 8 then just press the Windows log on the keyboard and start typing “Command Prompt”.
Now run the Command Prompt with admin rights. Simply right-click on the Command Prompt and simply select “Run as Administrator”
Step 2: Now in this section just type “netsh WLAN show drivers” (don’t use quotation mark here) right in the Command Prompt, just to check your computer supports a hosted network or not.
In the “Hosted Network Supported,” it must indicate “Yes” here it will show yes if your unit supports the wifi sharing.
If somehow it shows “No” then you will have to download the corresponding driver for your wifi adapter right before proceeding.
Step 3: For creating the hotspot, just type “netsh WLAN set hosted network mode=allow ssid=yournetworkname key=yournetworkpassword,” and now press Enter.
Remember one thing, “SSID” refers to the WiFi hotspot name and the “key” refers to the password.
You can also change the hotspot’s name and password with the aforementioned command.
Step 4: Now, it’s time to turn on the hotspot here, just type “netsh WLAN start hosted network”.
Here, make sure your computer adapter is switched on if you didn’t do the hotspot will not work.
Step 5: Here, again press the Start Button and start typing “Network and Sharing Centre” and just left-click on it.
Step 6: Select the “Change Adapter Settings” which you can easily find on the left side of the Window.
Here the network you want to share along with the newly created hotspot will be shown here.
Just choose the network connection you really want to share.
Now do a right-click on it and select “Properties” and go to the “Settings” tab.
Here in this section Allow other network users just to connect through this computer’s internet connection.
Here just select the WiFi hotspot you have created earlier.
To turn off the hotspot just type “netsh WLAN stop hosted network” in CMD.
Here, keep one thing in mind that you will have to enter the “netsh WLAN start” and “netsh WLAN stop” commands right in the Command Prompt to switch your hotspot on and off.
You have to repeat this process each time when you power on your computer.
It’s better to create the shortcut just to save time and effort.
- Best VPNs for WiFi HotSpots In with Full Features
- Hola VPN Review: Is This Free VPN Reliable?
- Hotspot Shield Elite VPN Coupon Codes
FAQs | Create a Wi-Fi Hotspot Using Command Prompt
🤔 How can I make my laptop a WiFi hotspot using CMD?
Step 1: Type netsh WLAN show drivers (without the quotation marks) in Command Prompt to check whether or not your computer supports a hosted network. ... Step 2: To create a hotspot, type netsh WLAN set hosted network mode=allow ssid=your network name key=yournetworkpassword, and hit Enter on your keyboard.
🤷♂️ How do I make my broadband into a WiFi hotspot?
You'll find the Mobile Hotspot tab on the Network & Internet page in Settings. If your Windows 10 system is simultaneously connected to your broadband by both Ethernet and WiFi, the first thing you need to do is select from where you want to share your internet connection.
🙋♀️ How do I connect to WiFi using CMD?
Search for command prompt using any method you prefer. Choose Command Prompt (Admin) in the results. To locate the name of the network to connect to, type netsh WLAN show profiles and press Enter on the keyboard.
🤙 How do I set up portable WiFi?
> Settings > Under Wireless & networks turn Wi-Fi Off. > Settings > More > Tethering & portable hotspot > Portable Wi-Fi Hotspot to turn on the hotspot. Password - Enter a unique password.
Conclusion | Create a Wi-Fi Hotspot Using Command Prompt 2022
Now you are able to create a Wi-Fi Hotspot using Command Prompt with this simple guide.
Here any machine running Windows XP and up, including Windows 8 can use this method to Create a Wi-Fi Hotspot.
Do let me know if you are facing any issues in setting up the hotspot in the comment section. Share this article on all trending social media platforms with your friends and family.